LM4RC Vacuum lifter with 4 suction cups in crossed-position

Suitable to lift fragile or large sized pieces

PNEUMATIC VACUUM LIFTER FOR MARBLE SLABS

  • Structure with 0° to 90° manual tilting able to block in horizontal position;
  • Continuous vacuum pump powered by compressed air;
  • Vacuum gauge with graduated and coloured scale to more easily monitor the degree of vacuum;
  • Powerful and quiet vacuum generators with reduced air consumption of 100 lt/min;
  • Operating pressure 4/6 Bar;
  • Blocking/unblocking rapid device for longitudinally adjusting the pads and 0°-90° adjustment by unthreading the pads;
  • Gaskets made of rubberized fabric and mousse suitable for smooth, flammed and bush-hammered surfaces;
  • High-limit yielding steel suction pads made of first quality materials;
  • No-falling non-return valve for vacuum;
  • Sliding valve to control gripping and releasing of the material with safety block against involuntary manoeuvres;
  • Ample safety tank in aluminium for vacuum reserve, to guarantee gripping even when there is a power cut and with condensation discharge valve;
  • Acoustic and visual alarm system which automatically signals a low vacuum degree. It works autonomously by means of rechargeable batteries and it is supplied with the appropriate battery charger at 220 volt;
  • Manoeuvring handle for the operator.

Technical data sheet

 

TypeLM4RC
Capacity (Kg)50010002000
 Suction cups4
C (mm)200300400
D (mm)500500550
A (mm)142014601460
B (Min/Max) (mm)820/1800970/18301030/1880
P (mm)840840870
Q (min/max) (mm)470/1230670/1230870/1290
H (mm)500500520

Contact

 
I have read and understood the privacy policy and consent to the processing of data.